Beginner’s Guide to Installing a Free Dish Set Top Box at Home (Step-by-Step)
If you're planning to enjoy Free Dish channels without monthly subscription fees, installing a Free Dish set top box at home is one of the smartest choices. With a one-time setup, you can watch 200+ channels in Hindi, regional languages, kids’ content, devotional channels, sports, and more — absolutely free.
The good news? You can install a Free Dish set top box at home even if you're a beginner.
This guide will walk you through everything—from the accessories you need to the step-by-step installation process.
What You Need Before Starting
To set up Free Dish successfully, make sure you have the following:
- ✔ Free Dish Set Top Box (MPEG-4 recommended)
- ✔ DTH Antenna (Dish)
- ✔ LNB (Low Noise Block Converter)
- ✔ Coaxial Cable (up to 15–25 meters)
- ✔ Remote & Batteries
- ✔ TV (LED/LCD/CRT—all compatible)
Optional Accessories:
- 🔹 Wall mount stand
- 🔹 HDMI cable (for HD viewing)
- 🔹 Signal meter (for alignment)
Step-by-Step Installation Process
Step 1: Unbox and Assemble the Dish Antenna
Attach the dish plate, LNB holder, clamp, pole mount, and screws. Ensure everything is tightened properly to avoid movement after installation.
Step 2: Mount the Dish in the Right Direction
To receive Free Dish signal, point the dish towards:
- Satellite: GSAT-15 (Ku-band)
- Direction: South-East (may vary slightly by location)
- Elevation: ~50–60 degrees
Tip: Use a smartphone compass or online alignment chart for accuracy.
Step 3: Connect the Cable to the Dish and Set Top Box
Connect one end of the coaxial cable to the LNB and the other end to the LNB IN port on the set top box. Tighten both ends securely.
Step 4: Connect the Set Top Box to the TV
Use one of the following based on your TV:
- HDMI cable (for best HD clarity)
- AV cable (yellow-red-white for CRT/older TVs)
Select the correct TV Source (HDMI/AV).
Step 5: Power On and Configure Settings
Turn on the set top box and TV. A setup or configuration screen should appear.
Step 6: Configure Satellite Settings
Go to:
Menu → Installation → Satellite → GSAT 15 / DD Free Dish
| Setting | Value |
|---|---|
| Satellite | GSAT-15 |
| LNB Frequency | 9750/10600 |
| TP Frequency | 11090 |
| Symbol Rate | 29500 |
| Polarity | Vertical |
Step 7: Adjust to Get Best Signal
Slowly adjust the dish until the Signal Quality > 65%.
Step 8: Scan for Channels
Navigate to:
Menu → Blind Scan / Auto Scan
The set top box will automatically detect and store all available Free Dish channels.
You're Ready to Watch Free Channels!
You now have access to:
- ✔ National & Entertainment Channels
- ✔ Kids & Cartoon Channels
- ✔ Devotional Channels
- ✔ Regional & News Networks
- ✔ Sports Channels
Tips for Best Performance
- Use an MPEG-4 HD Box for maximum compatibility
- Keep dish clear of obstructions (trees, walls)
- Blind scan occasionally for new channels
- Check dish alignment after heavy winds
Common Issues & Quick Fixes
| Issue | Fix |
|---|---|
| No Signal | Adjust dish direction / check cable connection |
| Few Channels Only | Run Blind Scan again |
| Channels Freezing | Check weather or loose cable |
| Remote Not Working | Replace batteries or repair |
Recommended LRIPL Set Top Boxes
- LRIPL LR777 MPEG-4 HD – Best for Free Dish users
- LRIPL LR27i Wi-Fi Enabled – Free Dish + YouTube streaming
- MPEG-2 Model – Budget-friendly basic viewing
Final Thoughts
Installing a Free Dish set top box at home is easier than most people think. With the right setup and careful alignment, you can enjoy unlimited entertainment with zero monthly cost.
Whether you’re upgrading your TV setup or cutting cable expenses, Free Dish is a smart, long-term solution.
