LRIPL SMPS Power Adapter PS005 LRIPL146 19V 2.1A for LED LCD TV (Black)

SKU: FSPSYADPPS005002
Rs. 850.00
In Stock Pre order Out of stock

This model is a power Adapter for Various home appliances, Laptop etc. This is designed with high frequency switching technology which makes it highly reliable and compact in size and light in weight. This model operation at AC to DC, AC input 100VAC-240VAC 50-60Hz. output power 60 Watt max, with protection functions: Overload protection, Over current protection, Short Circuit Protection, over temperature protection and With 4.4 MM pin tip connecter to suit as per required Applications, and make sure the polarity of tips connect correct before use.

Specifications
  • Wider AC input range from 100VAC to 240VAC makes it suitable for Indian power conditions
  • Protected against Over load, Short circuit, Over Voltage & Over Temperature.
  • Works under low voltages and high voltage where the linear fails
  • Compact size and light weight
  • Designed to meet all the EMI/EMC and safety requirements
  • Technical Detail
    Input voltages 100 - 240VAC
    Input Current < 1.5A
    Input Frequency 50HZ - 60HZ
    Ripple/Noise <40mV
    Output Voltage 19VDC +/- 5%
    Output Current 2.1 Amp.
    Minimum Efficiency >75%
    Operating Temperature Range 0 to 50 °C
    Plug Type Fix 2 Pin Plug type AC wire
    Output Connector Type 4.4MM & As per Customer Requirement

    Description

    This model is a power Adapter for Various home appliances, Laptop etc. This is designed with high frequency switching technology which makes it highly reliable and compact in size and light in weight. This model operation at AC to DC, AC input 100VAC-240VAC 50-60Hz. output power 60 Watt max, with protection functions: Overload protection, Over current protection, Short Circuit Protection, over temperature protection and With 4.4 MM pin tip connecter to suit as per required Applications, and make sure the polarity of tips connect correct before use.

    Specifications

    • Wider AC input range from 100VAC to 240VAC makes it suitable for Indian power conditions

    • Protected against Over load, Short circuit, Over Voltage & Over Temperature.

    • Works under low voltages and high voltage where the linear fails

    • Compact size and light weight

    • Designed to meet all the EMI/EMC and safety requirements

    Technical Detail

    • Input voltages 100 – 240VAC
    • Input Current < 1.5A
    • Input Frequency 50HZ – 60HZ
    • Ripple/Noise <40mV
    • Output Voltage 19VDC +/- 5%
    • Output Current 2.1 Amp.
    • Minimum Efficiency >75%
    • Operating Temperature Range 0 to 50 °C
    • Plug Type Fix 2 –Pin Plug type AC wire
    • Output Connector Type 4.4MM & As per Customer Requirement

    FAQ

    Q: How do I make sure that I am ordering the correct power supply adapter for my device?

    The only information you need to have in order to find the correct power supply for your device is the Voltage / Volts (V) and Amperage / Amps (A).

    Q: How do I know if a power supply on your website is compatible with my device?

    Electrical ratings of power supplies are very simple. If you match the voltage and the amperage of the power supply to your device's specifications, it will work. Voltage has to be an exact match (i.e 12 Volt). The Amp (A) rating (maximum draw) of the adapter you buy has to be the same or higher than the rating of the device you need to power. for example, If your device says it need 12V 3A, then an adapter rated at 3A or higher (eg. 3.5A, 4A, 5A) would all work. It is that simple.

    Q: How do I know the DC Connector of your power supplies will fit into my device?

    The vast majority of electronic devices that run on Volt DC use the standard DC connector (i.e. 2.1mm, 5.5mm x 2.5mm Barrell connector). All our power supply adapters come with a standard DC connector.

    Q: The adapter I ordered does not seem to be powering my device. What should I do?

    Step 1: Make sure the connector fits your device snuggly? If the connector fits in securely - go to step 2.
    Step 2: Make sure that the specifications of your device match the specifications of the power supply you ordered. If they match - go to step 3.
    Step 3: Test the power supply with a standard volt meter. If the unit does not put out desired Volts on the volt meter, or if you do not have access to a meter to test with, please return the unit to us for testing and replacement. Please visit our Returns Page for more information.