Earthma ER111-03 iON Pro 5-Device Universal Remote Control for TV, DTH/Cable Set Top Box, DVD Players, Home Theatres (with Learning feature)

Q. How can I setup my universal Remote via the Auto search procedure?

The EARTHMA Universal remote is compatible with most brands. You can also setup it with auto search configuration.

for TV

1. Switch on your TV first

2. Press TV key for 2 seconds, LED on your remote will blink and start glowing

3. Once you are done with step 2, press POWER KEY to start the auto search function to know your TV

4. Once your remote is done with auto search and has indentified your TV, it will turn OFF your TV

5. The moment you are done with the STEP 4 Press TV KEY on your remote within 4 seconds, LED will turn off.

6. It means that your remote is ready to work with your TV

for DTH/STB

1. Switch on your DTH/STB first

2. Press DTH/STB key for 2 seconds, LED on your remote will blink and start glowing

3. Once you are done with step 2, press POWER KEY to start the auto search function to know your DTH/STB

4. Once your remote is done with auto search and has indentified your DTH/STB, it will turn OFF your DTH/STB

5. the moment you are done with the STEP 4 Press DTH/STB KEY on your remote within 4 seconds, LED will turn off.

6. It means that your remote is ready to work with your DTH/STB

 Q. How can I setup my universal Remote via the setup code procedure?

The EARTHMA Universal remote is compatible with most brands of TV, DVD, STB/DTH and AUX devices. To start using the remote, please check if your brand is listed (details are in the manual) .

for TV

1. Switch on your device

2. Press TV key, red LED light will blink twice

3. enter the 4 digit code

4. LED light will blink twice and turn off

5. Press the ON/OFF key to test the code

6. If your device reacts, than its done.

7. If not, try again with the next code in the list.

8. Once you have found the code that works correctly, please write it down for future reference.

for DTH/STB

1. Switch on your device

2. Press DTH/STB key, green LED light will blink twice

3. enter the 4 digit code

4. LED light will blink twice and turn off

5. Press the ON/OFF key to test the code

6. If your device reacts, than its done.

7. If not, try again with the next code in the list.

8. Once you have found the code that works correctly, please write it down for future reference.

for DVD

1. Switch on your device

2. Press DVD key, green LED light will blink twice

3. enter the 4 digit code

4. LED light will blink twice and turn off

5. Press the ON/OFF key to test the code

6. If your device reacts, than its done.

7. If not, try again with the next code in the list.

8. Once you have found the code that works correctly, please write it down for future reference.

for AUX

1. Switch on your device

2. Press AUX key, green LED light will blink twice

3. enter the 4 digit code

4. LED light will blink twice and turn off

5. Press the ON/OFF key to test the code

6. If your device reacts, than its done.

7. If not, try again with the next code in the list.

8. Once you have found the code that works correctly, please write it down for future reference.

Q. What do I have to do before I start programming my TV and DTH/STB?

To start using the remote, please check if your brand is listed ,if yes than look for your code(details are in the manual) .

Q. The code for my TV and DTH/STB is not in the manual, what do I need to do?

you do not need to worry. You can also setup it with auto search configuration.

Q. Why doesn’t the learning work on my TV, DVD, STB/DTH and AUX?

There are a number of reasons why learning might be unsuccessful:

1.Make sure the original remote that came with the device is in working order, by testing it on your device. If it is not responding, it might not be working correctly.

 2.Ensure that the two remotes are approximately 2 to 3 cm apart, and that the transmitting end of the original remote is facing the remote. Sometimes holding the key on the original remote down for slightly longer may help, and conversely sometimes quickly pressing and releasing the key on the original works better.

3.The batteries used should have sufficient power. Even though the remote works when using it to switch on and off devices, it might not have enough power to be able to learn additional functions. Please replace a new set of batteries

4.Some manufacturer’s remotes use a different signal, or infra-red protocol, that the One For All remote cannot reproduce. These are commonly signals that use a higher frequency. Radio frequency remotes cannot be learned from, because these signals are not infra-red based.

Q. How can I program a missing function on my TV, DVD, STB/DTH and AUX?

It is possible to add missing functions via a procedure known as “Learning Key.”

Q. How can I learn a missing function on my TV, DVD, STB/DTH and AUX using the original remote control?

Learning is a process by which we can learn any functions of any remote control i.e. TV/DTH/STB/AUX/DVD etc to iON-Pro. Your ION Pro can learn up to 42 functions of same or different remote controls -

If you want to learn multiple functions of same remote in your ION Pro then follow the below step.

1. Keep both the remote controls i.e.( ION Pro & the other remote) facing each other at a distance of 1cm.

2. Press 'learn' mode key of ION Pro for 2-4 seconds until LED turns on.

3. Press any key/Function of your Earthma iON-Pro remote which you want to get learnt from other remote.

4. Now press the same key on the other remote and then press learn key of iON Pro, your desired key/function is saved in iON-Pro.

Q. How can I delete a learned key on my TV, DVD, STB/DTH and AUX?

for this you need to follow the learning procedure again for this particular key.

Q. How can I set up a device on my TV, DVD, STB/DTH and AUX if I do not have a code?

Learning is a process by which you can learn any functions of any remote control i.e. TV/DTH/STB/AUX/DVD  to iON-Pro.

Q. How do I perform a factory reset on my TV, DVD, STB/DTH and AUX in remote?

for factory reset, You need to remove the battery from remote for 20 minutes.

Q. What is the infrared operating distance for the universal Remote?

The IR operating distance is up to 10 meter.

Q. Does Earthma works on RF Technology Remote?

No, It does not work on RF (Radio Frequency Remote) as EARTHMA Universal Remote is IR Technology Remote.